Trolling Motors (by brand) > Minn Kota Trolling Motors

Replacing breakers

(1/2) > >>

Bobbyscott21:
Folks, I broke the manual switch off of one of the breakers. Question is: would it be ok to replace the 50A breaker with a 60A? The trolling motor is a Minnkota Maxxum 70# 24v and the one broken is the one that only has one power line connected. In the attached photo it is the lower breaker

bullet20dc:
if you're using 6 gauge copper wiring a 60amp breaker is ok but its on the edge,    use a manual reseting one not an autoreset

bobby_scott21`:
Thanks for the feedback. how many amps are these supposed to run?

Curt:
If I'm not mistaken, 50 AMP is the standard rating for your Trolling Motor. Maybe someone else can confirm that for you.

fishon-son:
50a on my boat....

Navigation

[0] Message Index

[#] Next page