Bass Boat Forums
Bass Boat Forums (by boat brand) => Nitro Bass Boats Forums => Topic started by: Jig Man on August 01, 2016, 09:25:43 PM
-
I had a Lowrance Gen 2 touch 9 left over after my boat swap so I decided to use it on the Nitro. Also the foot pedal was too deep for my liking so I raised it.
This is how it came from the factory.
(https://www.bassboatboards.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv13%2FJigMan%2FDSC03197_zpskhro49gc.jpg&hash=929d956a1f7f67b02fe6db8ac2f96fa4eb80eac5) (http://smg.photobucket.com/user/JigMan/media/DSC03197_zpskhro49gc.jpg.html)
I took the tool holder and cup holder out and put in the bridge that I had Poly Fab make me.
(https://www.bassboatboards.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv13%2FJigMan%2FDSC03198_zpsppcj7anw.jpg&hash=d68b7ed586246583008ae6d41e08ddbddb8fc7ac) (http://smg.photobucket.com/user/JigMan/media/DSC03198_zpsppcj7anw.jpg.html)
I then attached the hds 9 gimble bracket.
(https://www.bassboatboards.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv13%2FJigMan%2FDSC03199_zpsoiu5linj.jpg&hash=edb1400aff7ba88a7e3fd063938af1c5d1e1ca0f) (http://smg.photobucket.com/user/JigMan/media/DSC03199_zpsoiu5linj.jpg.html)
I put in the foot pedal lift and mounted the hds 9. Now it will be used for chart and I can split the 12 with 2d and down scan.
(https://www.bassboatboards.com/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv13%2FJigMan%2FDSC03200_zpsaxpg3xyc.jpg&hash=80db2411490e2e11e937db64418a01befd17a58d) (http://smg.photobucket.com/user/JigMan/media/DSC03200_zpsaxpg3xyc.jpg.html)
-
Cool setup! You lost your tool holder, but I guess you can't have everything! (nope)
-
It has 2 other tool holders and 4 other cup holders so I think I'm good. Besides things blew out of that front one if they weren't strapped in.
-
It has 2 other tool holders and 4 other cup holders so I think I'm good. Besides things blew out of that front one if they weren't strapped in.
I would say that two other tool holders and 4 other cup holders would be sufficient (giggle)
And I was wondering how secure stuff would be up there if the water was rough. All I could picture was a pair of needle nose pliers flying at you at 60 MPH :surprised: (fp)
-
had a can of bang take my head off once.........i can say ouch......
-
It had a bungie to hold stuff in place. Things blew out on the way to the lake and were scattered around the deck when I didn't bungie them in. I won't miss it. My wife and I are going to run down to Table Rock this morning to see if I have everything adjusted to suit me.
-
looks great nice job