Bass Boat Forums

Bass Boat Forums (by boat brand) => Ranger Bass Boats Forums => Topic started by: pprice01 on April 21, 2018, 03:58:48 PM

Title: Size of railings needed for Bimini Install
Post by: pprice01 on April 21, 2018, 03:58:48 PM

Hi everyone,

I have. 1992 392v and it already has railed Installed on the gunnels, so I need to install the Bimini top connection to the existing rails.

Does anyone know the size/diameter of the factory railing so that I can order the correct part?

You can see the rails in the attached picture.

Thanks,

Paul

(https://uploads.tapatalk-cdn.com/20180421/50aadc5297906561787fe7b2277dfce3.jpg)


Sent from my iPhone using Tapatalk

Title: Re: Size of railings needed for Bimini Install
Post by: pprice01 on April 21, 2018, 04:00:59 PM

The part will be like this:

(https://uploads.tapatalk-cdn.com/20180421/8c06d764b2a92b4f6760024537818ca9.jpg)


Sent from my iPhone using Tapatalk

Title: Re: Size of railings needed for Bimini Install
Post by: Curt on April 21, 2018, 08:23:22 PM

Judging by the pic, those rails look like 1 inch. You should be able to use some kind of calipers or other type of instrument to measure the outside diameter, just to be sure.