what products are u using? you may have to be a little more aggressive w/ the compound, but not too much or you'll start exposing flakes - not good
Check out http://protecproducts.com/Joe's stuff is some of the best on the market!@Basscat1
he wetsanded it, even though the actual Ranger manual says not to.
Quote from: pprice01 on January 18, 2018, 09:48:24 PMhe wetsanded it, even though the actual Ranger manual says not to.I've heard of a lot of guys who wet sand boats when the finish is really bad. @Hydeshydro @Matt@Fractures and @Basscat1 all do this, I believe.
I believe it, as it was my initial instinct to do this as well. The question is really how low of a grit to start - 1000? To keep it at a safe but effective level.
Also, the way it's labeled, is it a second interior light for different compartments, kinda implied by the ones to the left for 2 bilge pumps which is a Ranger standard.